The live demonstration shows the actual environment of various sites around the world using GeoVision's Digital Video Surveillance System. To view the live webcam demonstration of various sites, please select the following:

more..

 

 

 

 

 

 

 

 

 

 

 

Our Product : GeoVision
Hardware Accessories
GV-NET Card V3.1
The GV-NET Card V3.1 is a RS-485 / RS-232 interface converter that can be installed inside a PC. It also supports connection via USB port.

GV-NET/IO Card V3.1
The GV-NET/IO card provides 4 inputs and 4 relay outputs. It supports both DC and AC output voltages and provides a USB port as well.


GV-IO 12-In Card V3
With 12 digital inputs, the GV-IO 12-In Card is designed to work with the GV-NET/IO Card to provide an interface for your external devices such as sensors and detectors.

GV-IO 12-Out Card V3
With 12 relay outputs, the GV-IO 12-Out Card is designed to work with GV-NET/IO Card to provide an interface for your external devices such as alarms and gates.

GV-Loop Through Card
The GV-Loop Through Card is designed to take the video signal directly from the GV Capture Card, without internal device processes, and then split it into 16 signals while maintaining video quality.

GV-COM V2
The GV-COM V2 adds one RS-485 port to your computer through a USB connector. The GV-COM V2 can convert the standard RS-232 signal, through USB connector, to RS-485 2-wire control for PTZ cameras, GV-Data Capture Box or any other RS-485 devices.

GV-Relay V2
The GV-Relay V2 is designed especially for driving higher voltage output devices, and it is controlled by other GV devices, such as GV-Video Server, GV-Compact DVR, GV-IP Camera, GV-DSP LPR, GV-I/O USB Box and GV-NET/IO Card V3.1. The GV-Relay V2 provides 4 relay outputs, and each output can be set as normally open (NO) or normally closed (NC) independently as per your requirement.

GV-Hub V2
The GV-Hub V2 adds four RS-232/RS-485 serial ports through your computer’s USB port. The USB solution for serial port extension is perfect for any RS-485 to RS-232 conversion requirements, such as POS and PTZ applications.

GV-IO Box 4 Ports
The GV-IO Box 4 provides 4 inputs and 4 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC connection.

GV-IO Box 8 Ports
The GV-IO Box 8 provides 8 inputs and 8 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC connection.

GV-IO Box 16 Ports
The GV-IO Box 16 provides 16 inputs and 16 relay outputs. It supports both DC and AC output voltages, and provides a USB port for PC connection.

GV-Keyboard V3 for GV-System
The GV-Keyboard V3 is designed to program and operate GV-System, and it can also be connected with PTZ cameras directly for PTZ control.
Key Features
  • A Keyboard can control up to 16 GV-Systems.
  • Multiple Keyboards can work with up to 8 monitors for Digital Matrix, TV Quad and Spot Monitor applications.
  • A Keyboard can directly set up and control up to 32 PTZ cameras.

GV-System Remote Control
Controls GV-System with the Remote Control.

GV-Joystick
The GV-Joystick provides full control of the PTZ devices connected to the GV-System. It faciliates functions such as tilt, pan, or zoom to achieve precision surveillance. When combined with the GV-Keyboard, it empowers GV-System operations.

GV-GPS Receiver
The GV-GPS Receiver can work with GV-System, GV-Video Server and GV-Compact DVR to perform GPS vehicle tracking. It comes with three types of models: UART, RS-232, and USB.

GV-PA191 PoE Adapter
The GV-PA191 is a Power over Ethernet (PoE) adapter designed to provide power to the IP device through a single Ethernet cable.

GV-Data Capture V3E
GV-Data Capture V3E is an innovated Ethernet version of the Data Capture Box allowing the integration of POS systems and GV-DVR systems via LAN, WAN, or Internet.

GV-Wiegand Capture
GV-Wiegand Capture is a box device that can integrate your current Wiegand access control system into GeoVision DVR systems